End session when time limits are reached
Verified with Windows 11 25H2 — updated on July 30, 2026
Supported on: At least Windows Server 2003 operating systems or Windows XP Professional
Path in the GPO console
User Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits Description
This policy setting specifies whether to end a Remote Desktop Services session that has timed out instead of disconnecting it. You can use this setting to direct Remote Desktop Services to end a session (that is, the user is logged off and the session is deleted from the server) after time limits for active or idle sessions are reached. By default, Remote Desktop Services disconnects sessions that reach their time limits. Time limits are set locally by the server administrator or by using Group Policy. See the policy settings Set time limit for active Remote Desktop Services sessions and Set time limit for active but idle Remote Desktop Services sessions policy settings. If you enable this policy setting, Remote Desktop Services ends any session that reaches its time-out limit. If you disable this policy setting, Remote Desktop Services always disconnects a timed-out session, even if specified otherwise by the server administrator. If you do not configure this policy setting, Remote Desktop Services disconnects a timed-out session, unless specified otherwise in local settings. Note: This policy setting only applies to time-out limits that are explicitly set by the administrator. This policy setting does not apply to time-out events that occur due to connectivity or network conditions. This setting appears in both Computer Configuration and User Configuration. If both settings are configured, the Computer Configuration setting takes precedence.
Registry
SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services Value name: fResetBroken
Enabled: fResetBroken = 1
Disabled: fResetBroken = 0
MDM / Intune (CSP)
./User/Vendor/MSFT/Policy/Config/ADMX_TerminalServer/TS_Session_End_On_Limit_1 Microsoft Learn documentation Mapping data: Microsoft Learn (CC BY 4.0)
Export Builder
BETAConfigure the state, scope and options, then generate .reg, PowerShell, Intune and SCCM outputs — or add the setting to a multi-setting collection.
These exports write the registry — this is not a managed GPO. ⓘ
.reg file
Windows Registry Editor Version 5.00
; Exported from gporais.com
; Policy: End session when time limits are reached
; State: Enabled
; Supported on: At least Windows Server 2003 operating systems or Windows XP Professional
[HKEY_CURRENT_USER\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services]
"fResetBroken"=dword:00000001More formats (PowerShell, Intune, SCCM)
PowerShell
# Exported from gporais.com
# Policy: End session when time limits are reached
# State: Enabled
# Supported on: At least Windows Server 2003 operating systems or Windows XP Professional
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
$path = 'HKCU:\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'fResetBroken' -Value 1 -Type DWordIntune XML
OMA-URI: ./User/Vendor/MSFT/Policy/Config/ADMX_TerminalServer/TS_Session_End_On_Limit_1
Data type: String
Value:
<enabled/>Intune Remediation
# === Detection script ===
# Exported from gporais.com
# Policy: End session when time limits are reached
# State: Enabled
# Supported on: At least Windows Server 2003 operating systems or Windows XP Professional
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
function Test-RegistryValue {
param(
[Parameter(Mandatory = $true)][string]$Path,
[Parameter(Mandatory = $true)][string]$Name,
[object]$Expected,
[ValidateSet('String', 'DWord', 'MultiString')][string]$Kind = 'String',
[switch]$Absent
)
try {
$item = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction Stop
} catch {
return $Absent.IsPresent
}
if ($Absent.IsPresent) { return $false }
$actual = $item.$Name
if ($Kind -eq 'DWord') { return ([int64]$actual) -eq ([int64]$Expected) }
if ($Kind -eq 'MultiString') {
$actualValues = @($actual)
$expectedValues = @($Expected)
if ($actualValues.Count -ne $expectedValues.Count) { return $false }
for ($i = 0; $i -lt $expectedValues.Count; $i++) {
if ([string]$actualValues[$i] -ne [string]$expectedValues[$i]) { return $false }
}
return $true
}
return [string]$actual -eq [string]$Expected
}
$checks = @(
(Test-RegistryValue -Path 'HKCU:\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services' -Name 'fResetBroken' -Expected 1 -Kind DWord)
)
if ($checks -notcontains $false) {
Write-Output 'Compliant'
exit 0
}
Write-Output 'Non-compliant'
exit 1
# === Remediation script ===
# Exported from gporais.com
# Policy: End session when time limits are reached
# State: Enabled
# Supported on: At least Windows Server 2003 operating systems or Windows XP Professional
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
$path = 'HKCU:\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'fResetBroken' -Value 1 -Type DWordSCCM scripts
# Exported from gporais.com
# Policy: End session when time limits are reached
# State: Enabled
# Supported on: At least Windows Server 2003 operating systems or Windows XP Professional
# SCCM Configuration Item guidance:
# Create a Configuration Item of type "Setting: Script".
# Discovery script: use the Detection script below.
# Remediation script: use the Remediation script below.
# Compliance rule: the Discovery script output equals 'Compliant'.
# === Detection script ===
# Exported from gporais.com
# Policy: End session when time limits are reached
# State: Enabled
# Supported on: At least Windows Server 2003 operating systems or Windows XP Professional
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
function Test-RegistryValue {
param(
[Parameter(Mandatory = $true)][string]$Path,
[Parameter(Mandatory = $true)][string]$Name,
[object]$Expected,
[ValidateSet('String', 'DWord', 'MultiString')][string]$Kind = 'String',
[switch]$Absent
)
try {
$item = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction Stop
} catch {
return $Absent.IsPresent
}
if ($Absent.IsPresent) { return $false }
$actual = $item.$Name
if ($Kind -eq 'DWord') { return ([int64]$actual) -eq ([int64]$Expected) }
if ($Kind -eq 'MultiString') {
$actualValues = @($actual)
$expectedValues = @($Expected)
if ($actualValues.Count -ne $expectedValues.Count) { return $false }
for ($i = 0; $i -lt $expectedValues.Count; $i++) {
if ([string]$actualValues[$i] -ne [string]$expectedValues[$i]) { return $false }
}
return $true
}
return [string]$actual -eq [string]$Expected
}
$checks = @(
(Test-RegistryValue -Path 'HKCU:\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services' -Name 'fResetBroken' -Expected 1 -Kind DWord)
)
if ($checks -notcontains $false) {
Write-Output 'Compliant'
exit 0
}
Write-Output 'Non-compliant'
exit 1
# === Remediation script ===
# Exported from gporais.com
# Policy: End session when time limits are reached
# State: Enabled
# Supported on: At least Windows Server 2003 operating systems or Windows XP Professional
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
$path = 'HKCU:\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'fResetBroken' -Value 1 -Type DWordBuilding a multi-setting collection? Add this setting and generate combined .reg / PowerShell / GPO scripts.