Set Teredo Refresh Rate
Verified with Windows 11 25H2 — updated on July 30, 2026
Supported on: At least Windows Server 2008 R2 or Windows 7
Path in the GPO console
Computer Configuration\Administrative Templates\Network\TCPIP Settings\IPv6 Transition Technologies Description
This policy setting allows you to configure the Teredo refresh rate. Note: On a periodic basis (by default, every 30 seconds), Teredo clients send a single Router Solicitation packet to the Teredo server. The Teredo server sends a Router Advertisement Packet in response. This periodic packet refreshes the IP address and UDP port mapping in the translation table of the Teredo client's NAT device. If you enable this policy setting, you can specify the refresh rate. If you choose a refresh rate longer than the port mapping in the Teredo client's NAT device, Teredo might stop working or connectivity might be intermittent. If you disable or do not configure this policy setting, the refresh rate is configured using the local settings on the computer. The default refresh rate is 30 seconds.
Registry
Software\Policies\Microsoft\Windows\TCPIP\v6Transition MDM / Intune (CSP)
./Device/Vendor/MSFT/Policy/Config/ADMX_tcpip/Teredo_Refresh_Rate Microsoft Learn documentation Mapping data: Microsoft Learn (CC BY 4.0)
Export Builder
BETAConfigure the state, scope and options, then generate .reg, PowerShell, Intune and SCCM outputs — or add the setting to a multi-setting collection.
These exports write the registry — this is not a managed GPO. ⓘ
.reg file
Windows Registry Editor Version 5.00
; Exported from gporais.com
; Policy: Set Teredo Refresh Rate
; State: Enabled
; Supported on: At least Windows Server 2008 R2 or Windows 7
[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\TCPIP\v6Transition]
"Teredo_RefreshRate"=dword:0000001eMore formats (PowerShell, Intune, SCCM)
PowerShell
# Exported from gporais.com
# Policy: Set Teredo Refresh Rate
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
$path = 'HKLM:\Software\Policies\Microsoft\Windows\TCPIP\v6Transition'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'Teredo_RefreshRate' -Value 30 -Type DWordIntune XML
OMA-URI: ./Device/Vendor/MSFT/Policy/Config/ADMX_tcpip/Teredo_Refresh_Rate
Data type: String
Value:
<enabled/>
<data id="TeredoRefreshRateBox" value="30"/>Intune Remediation
# === Detection script ===
# Exported from gporais.com
# Policy: Set Teredo Refresh Rate
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
function Test-RegistryValue {
param(
[Parameter(Mandatory = $true)][string]$Path,
[Parameter(Mandatory = $true)][string]$Name,
[object]$Expected,
[ValidateSet('String', 'DWord', 'MultiString')][string]$Kind = 'String',
[switch]$Absent
)
try {
$item = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction Stop
} catch {
return $Absent.IsPresent
}
if ($Absent.IsPresent) { return $false }
$actual = $item.$Name
if ($Kind -eq 'DWord') { return ([int64]$actual) -eq ([int64]$Expected) }
if ($Kind -eq 'MultiString') {
$actualValues = @($actual)
$expectedValues = @($Expected)
if ($actualValues.Count -ne $expectedValues.Count) { return $false }
for ($i = 0; $i -lt $expectedValues.Count; $i++) {
if ([string]$actualValues[$i] -ne [string]$expectedValues[$i]) { return $false }
}
return $true
}
return [string]$actual -eq [string]$Expected
}
$checks = @(
(Test-RegistryValue -Path 'HKLM:\Software\Policies\Microsoft\Windows\TCPIP\v6Transition' -Name 'Teredo_RefreshRate' -Expected 30 -Kind DWord)
)
if ($checks -notcontains $false) {
Write-Output 'Compliant'
exit 0
}
Write-Output 'Non-compliant'
exit 1
# === Remediation script ===
# Exported from gporais.com
# Policy: Set Teredo Refresh Rate
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
$path = 'HKLM:\Software\Policies\Microsoft\Windows\TCPIP\v6Transition'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'Teredo_RefreshRate' -Value 30 -Type DWordSCCM scripts
# Exported from gporais.com
# Policy: Set Teredo Refresh Rate
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# SCCM Configuration Item guidance:
# Create a Configuration Item of type "Setting: Script".
# Discovery script: use the Detection script below.
# Remediation script: use the Remediation script below.
# Compliance rule: the Discovery script output equals 'Compliant'.
# === Detection script ===
# Exported from gporais.com
# Policy: Set Teredo Refresh Rate
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
function Test-RegistryValue {
param(
[Parameter(Mandatory = $true)][string]$Path,
[Parameter(Mandatory = $true)][string]$Name,
[object]$Expected,
[ValidateSet('String', 'DWord', 'MultiString')][string]$Kind = 'String',
[switch]$Absent
)
try {
$item = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction Stop
} catch {
return $Absent.IsPresent
}
if ($Absent.IsPresent) { return $false }
$actual = $item.$Name
if ($Kind -eq 'DWord') { return ([int64]$actual) -eq ([int64]$Expected) }
if ($Kind -eq 'MultiString') {
$actualValues = @($actual)
$expectedValues = @($Expected)
if ($actualValues.Count -ne $expectedValues.Count) { return $false }
for ($i = 0; $i -lt $expectedValues.Count; $i++) {
if ([string]$actualValues[$i] -ne [string]$expectedValues[$i]) { return $false }
}
return $true
}
return [string]$actual -eq [string]$Expected
}
$checks = @(
(Test-RegistryValue -Path 'HKLM:\Software\Policies\Microsoft\Windows\TCPIP\v6Transition' -Name 'Teredo_RefreshRate' -Expected 30 -Kind DWord)
)
if ($checks -notcontains $false) {
Write-Output 'Compliant'
exit 0
}
Write-Output 'Non-compliant'
exit 1
# === Remediation script ===
# Exported from gporais.com
# Policy: Set Teredo Refresh Rate
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
$path = 'HKLM:\Software\Policies\Microsoft\Windows\TCPIP\v6Transition'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'Teredo_RefreshRate' -Value 30 -Type DWordBuilding a multi-setting collection? Add this setting and generate combined .reg / PowerShell / GPO scripts.