Allow Trusted Locations on the network
Verified with Microsoft 365/Office 5568.1000 — updated on September 4, 2026
Supported on: At least Windows Server 2008 R2 or Windows 7
Path in the GPO console
User Configuration\Administrative Templates\Microsoft Project 2016\Project Options\Security\Trust Center Description
This policy setting controls whether trusted locations on the network can be used. If you enable this policy setting, users can specify trusted locations on network shares or in other remote locations that are not under their direct control by clicking the "Add new location" button in the Trusted Locations section of the Trust Center. Content, code, and add-ins are allowed to load from trusted locations with minimal security and without prompting the user for permission. If you disable this policy setting, the selected application ignores any network locations listed in the Trusted Locations section of the Trust Center. If you also deploy Trusted Locations via Group Policy, you should verify whether any of them are remote locations. If any of them are remote locations and you do not allow remote locations via this policy setting, those policy keys that point to remote locations will be ignored on client computers. Disabling this policy setting does not delete any network locations from the Trusted Locations list, but causes disruption for users who add network locations to the Trusted Locations list. Users are also prevented from adding new network locations to the Trusted Locations list in the Trust Center. We recommended that you do not enable this policy setting (as the "Allow Trusted Locations on my network (not recommended)" check box also states). Therefore, in practice, it should be possible to disable this policy setting in most situations without causing significant usability issues for most users. If you do not enable this policy setting, users can select the "Allow Trusted Locations on my network (not recommended)" check box if desired and then specify trusted locations by clicking the "Add new location" button.
Registry
software\policies\microsoft\office\16.0\ms project\security\trusted locations Value name: allownetworklocations
Enabled: allownetworklocations = 1
Disabled: allownetworklocations = 0
Export Builder
BETAConfigure the state, scope and options, then generate .reg, PowerShell, Intune and SCCM outputs — or add the setting to a multi-setting collection.
These exports write the registry — this is not a managed GPO. ⓘ
.reg file
Windows Registry Editor Version 5.00
; Exported from gporais.com
; Policy: Allow Trusted Locations on the network
; State: Enabled
; Supported on: At least Windows Server 2008 R2 or Windows 7
[HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\ms project\security\trusted locations]
"allownetworklocations"=dword:00000001More formats (PowerShell, Intune, SCCM)
PowerShell
# Exported from gporais.com
# Policy: Allow Trusted Locations on the network
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
$path = 'HKCU:\software\policies\microsoft\office\16.0\ms project\security\trusted locations'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'allownetworklocations' -Value 1 -Type DWordIntune XML
No direct Policy CSP / OMA-URI mapping for this policy. Use the Intune Remediation tab, or ingest the ADMX in Intune.Intune Remediation
# === Detection script ===
# Exported from gporais.com
# Policy: Allow Trusted Locations on the network
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
function Test-RegistryValue {
param(
[Parameter(Mandatory = $true)][string]$Path,
[Parameter(Mandatory = $true)][string]$Name,
[object]$Expected,
[ValidateSet('String', 'DWord', 'MultiString')][string]$Kind = 'String',
[switch]$Absent
)
try {
$item = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction Stop
} catch {
return $Absent.IsPresent
}
if ($Absent.IsPresent) { return $false }
$actual = $item.$Name
if ($Kind -eq 'DWord') { return ([int64]$actual) -eq ([int64]$Expected) }
if ($Kind -eq 'MultiString') {
$actualValues = @($actual)
$expectedValues = @($Expected)
if ($actualValues.Count -ne $expectedValues.Count) { return $false }
for ($i = 0; $i -lt $expectedValues.Count; $i++) {
if ([string]$actualValues[$i] -ne [string]$expectedValues[$i]) { return $false }
}
return $true
}
return [string]$actual -eq [string]$Expected
}
$checks = @(
(Test-RegistryValue -Path 'HKCU:\software\policies\microsoft\office\16.0\ms project\security\trusted locations' -Name 'allownetworklocations' -Expected 1 -Kind DWord)
)
if ($checks -notcontains $false) {
Write-Output 'Compliant'
exit 0
}
Write-Output 'Non-compliant'
exit 1
# === Remediation script ===
# Exported from gporais.com
# Policy: Allow Trusted Locations on the network
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
$path = 'HKCU:\software\policies\microsoft\office\16.0\ms project\security\trusted locations'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'allownetworklocations' -Value 1 -Type DWordSCCM scripts
# Exported from gporais.com
# Policy: Allow Trusted Locations on the network
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# SCCM Configuration Item guidance:
# Create a Configuration Item of type "Setting: Script".
# Discovery script: use the Detection script below.
# Remediation script: use the Remediation script below.
# Compliance rule: the Discovery script output equals 'Compliant'.
# === Detection script ===
# Exported from gporais.com
# Policy: Allow Trusted Locations on the network
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
function Test-RegistryValue {
param(
[Parameter(Mandatory = $true)][string]$Path,
[Parameter(Mandatory = $true)][string]$Name,
[object]$Expected,
[ValidateSet('String', 'DWord', 'MultiString')][string]$Kind = 'String',
[switch]$Absent
)
try {
$item = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction Stop
} catch {
return $Absent.IsPresent
}
if ($Absent.IsPresent) { return $false }
$actual = $item.$Name
if ($Kind -eq 'DWord') { return ([int64]$actual) -eq ([int64]$Expected) }
if ($Kind -eq 'MultiString') {
$actualValues = @($actual)
$expectedValues = @($Expected)
if ($actualValues.Count -ne $expectedValues.Count) { return $false }
for ($i = 0; $i -lt $expectedValues.Count; $i++) {
if ([string]$actualValues[$i] -ne [string]$expectedValues[$i]) { return $false }
}
return $true
}
return [string]$actual -eq [string]$Expected
}
$checks = @(
(Test-RegistryValue -Path 'HKCU:\software\policies\microsoft\office\16.0\ms project\security\trusted locations' -Name 'allownetworklocations' -Expected 1 -Kind DWord)
)
if ($checks -notcontains $false) {
Write-Output 'Compliant'
exit 0
}
Write-Output 'Non-compliant'
exit 1
# === Remediation script ===
# Exported from gporais.com
# Policy: Allow Trusted Locations on the network
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
$path = 'HKCU:\software\policies\microsoft\office\16.0\ms project\security\trusted locations'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'allownetworklocations' -Value 1 -Type DWordBuilding a multi-setting collection? Add this setting and generate combined .reg / PowerShell / GPO scripts.