Outlook Security Mode
Verified with Microsoft 365/Office 5568.1000 — updated on September 4, 2026
Supported on: At least Windows Server 2008 R2 or Windows 7
Path in the GPO console
User Configuration\Administrative Templates\Microsoft Outlook 2016\Security\Security Form Settings Description
This policy setting controls which set of security settings are enforced in Outlook. If you enable this policy setting, you can choose from four options for enforcing Outlook security settings: * Outlook Default Security - This option is the default configuration in Outlook. Users can configure security themselves, and Outlook ignores any security-related settings configured in Group Policy. * Use Security Form from 'Outlook Security Settings' Public Folder - Outlook uses the settings from the security form published in the designated public folder. * Use Security Form from 'Outlook 10 Security Settings' Public Folder - Outlook uses the settings from the security form published in the designated public folder. * Use Outlook Security Group Policy - Outlook uses security settings from Group Policy. Important - You must enable this policy setting if you want to apply the other Outlook security policy settings mentioned in this guide. If you disable or do not configure this policy setting, Outlook users can configure security for themselves, and Outlook ignores any security-related settings that are configured in Group Policy. Note - In previous versions of Outlook, when security settings were published in a form in Exchange Server public folders, users who needed these settings required the HKEY_CURRENT_USER\Software\Policies\Microsoft\Security\CheckAdminSettings registry key to be set on their computers for the settings to apply. In Outlook, the CheckAdminSettings registry key is no longer used to determine users' security settings. Instead, the Outlook Security Mode setting can be used to determine whether Outlook security should be controlled directly by Group Policy, by the security form from the Outlook Security Settings Public Folder, or by the settings on users' own computers.
Registry
software\policies\microsoft\office\16.0\outlook\security Export Builder
BETAConfigure the state, scope and options, then generate .reg, PowerShell, Intune and SCCM outputs — or add the setting to a multi-setting collection.
These exports write the registry — this is not a managed GPO. ⓘ
.reg file
Windows Registry Editor Version 5.00
; Exported from gporais.com
; Policy: Outlook Security Mode
; State: Enabled
; Supported on: At least Windows Server 2008 R2 or Windows 7
[HKEY_CURRENT_USER\software\policies\microsoft\office\16.0\outlook\security]
"adminsecuritymode"=dword:00000000More formats (PowerShell, Intune, SCCM)
PowerShell
# Exported from gporais.com
# Policy: Outlook Security Mode
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
$path = 'HKCU:\software\policies\microsoft\office\16.0\outlook\security'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'adminsecuritymode' -Value 0 -Type DWordIntune XML
No direct Policy CSP / OMA-URI mapping for this policy. Use the Intune Remediation tab, or ingest the ADMX in Intune.Intune Remediation
# === Detection script ===
# Exported from gporais.com
# Policy: Outlook Security Mode
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
function Test-RegistryValue {
param(
[Parameter(Mandatory = $true)][string]$Path,
[Parameter(Mandatory = $true)][string]$Name,
[object]$Expected,
[ValidateSet('String', 'DWord', 'MultiString')][string]$Kind = 'String',
[switch]$Absent
)
try {
$item = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction Stop
} catch {
return $Absent.IsPresent
}
if ($Absent.IsPresent) { return $false }
$actual = $item.$Name
if ($Kind -eq 'DWord') { return ([int64]$actual) -eq ([int64]$Expected) }
if ($Kind -eq 'MultiString') {
$actualValues = @($actual)
$expectedValues = @($Expected)
if ($actualValues.Count -ne $expectedValues.Count) { return $false }
for ($i = 0; $i -lt $expectedValues.Count; $i++) {
if ([string]$actualValues[$i] -ne [string]$expectedValues[$i]) { return $false }
}
return $true
}
return [string]$actual -eq [string]$Expected
}
$checks = @(
(Test-RegistryValue -Path 'HKCU:\software\policies\microsoft\office\16.0\outlook\security' -Name 'adminsecuritymode' -Expected 0 -Kind DWord)
)
if ($checks -notcontains $false) {
Write-Output 'Compliant'
exit 0
}
Write-Output 'Non-compliant'
exit 1
# === Remediation script ===
# Exported from gporais.com
# Policy: Outlook Security Mode
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
$path = 'HKCU:\software\policies\microsoft\office\16.0\outlook\security'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'adminsecuritymode' -Value 0 -Type DWordSCCM scripts
# Exported from gporais.com
# Policy: Outlook Security Mode
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# SCCM Configuration Item guidance:
# Create a Configuration Item of type "Setting: Script".
# Discovery script: use the Detection script below.
# Remediation script: use the Remediation script below.
# Compliance rule: the Discovery script output equals 'Compliant'.
# === Detection script ===
# Exported from gporais.com
# Policy: Outlook Security Mode
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
function Test-RegistryValue {
param(
[Parameter(Mandatory = $true)][string]$Path,
[Parameter(Mandatory = $true)][string]$Name,
[object]$Expected,
[ValidateSet('String', 'DWord', 'MultiString')][string]$Kind = 'String',
[switch]$Absent
)
try {
$item = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction Stop
} catch {
return $Absent.IsPresent
}
if ($Absent.IsPresent) { return $false }
$actual = $item.$Name
if ($Kind -eq 'DWord') { return ([int64]$actual) -eq ([int64]$Expected) }
if ($Kind -eq 'MultiString') {
$actualValues = @($actual)
$expectedValues = @($Expected)
if ($actualValues.Count -ne $expectedValues.Count) { return $false }
for ($i = 0; $i -lt $expectedValues.Count; $i++) {
if ([string]$actualValues[$i] -ne [string]$expectedValues[$i]) { return $false }
}
return $true
}
return [string]$actual -eq [string]$Expected
}
$checks = @(
(Test-RegistryValue -Path 'HKCU:\software\policies\microsoft\office\16.0\outlook\security' -Name 'adminsecuritymode' -Expected 0 -Kind DWord)
)
if ($checks -notcontains $false) {
Write-Output 'Compliant'
exit 0
}
Write-Output 'Non-compliant'
exit 1
# === Remediation script ===
# Exported from gporais.com
# Policy: Outlook Security Mode
# State: Enabled
# Supported on: At least Windows Server 2008 R2 or Windows 7
# Warning: In SYSTEM context (the Intune default), HKCU targets the SYSTEM profile. Run this script using the logged-on credentials.
$path = 'HKCU:\software\policies\microsoft\office\16.0\outlook\security'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'adminsecuritymode' -Value 0 -Type DWordBuilding a multi-setting collection? Add this setting and generate combined .reg / PowerShell / GPO scripts.