Configurer la fonctionnalité « Bloquer à la première consultation »
Vérifié avec Windows 11 26H2 — mis à jour le 30 juillet 2026 Pris en charge sur : Au moins Windows Server 2016, Windows 10
Baseline de sécurité Microsoft (Windows 11 v26H2 v2) : Activé GPO « MSFT Windows 11 26H2 - Defender Antivirus »
Chemin dans la console GPO
Configuration ordinateur\Modèles d'administration\Composants Windows\Antivirus Microsoft Defender\MAPS Registre
Software\Policies\Microsoft\Windows Defender\Spynet - Nom de valeur :
-
DisableBlockAtFirstSeenREG_DWORD - Activé :
0- Désactivé :
1
MDM / Intune (CSP)
./Device/Vendor/MSFT/Policy/Config/ADMX_MicrosoftDefenderAntivirus/DisableBlockAtFirstSeen Documentation Microsoft Learn Données de correspondance : Microsoft Learn (CC BY 4.0)
Description
Cette fonctionnalité garantit que l’appareil vérifie en temps réel auprès du Microsoft Active Protection Service (MAPS) avant d’autoriser l’exécution ou l’accès à certains contenus. Si cette fonctionnalité est désactivée, la vérification n’est pas effectuée, ce qui diminue l’état de protection de l’appareil. Activé : le paramètre Bloquer à la première consultation est activé. Désactivé : le paramètre Bloquer à la première consultation est désactivé. Cette fonctionnalité exige que les paramètres de cette stratégie de groupe soient définis comme suit : MAPS -> L’option « Rejoindre Microsoft MAPS » doit être activée, sans quoi la fonctionnalité « Bloquer à la première consultation » ne fonctionnera pas. MAPS -> L’option « Envoyer des exemples de fichier lorsqu’une analyse supplémentaire est nécessaire » doit être définie sur 1 (Envoyer des échantillons sécurisés) ou 3 (Envoyer tous les échantillons). Si l’option est définie sur 0 (Toujours demander), l’état de protection de l’appareil diminue. Si l’option est définie sur 2 (Ne jamais envoyer), la fonctionnalité « Bloquer à la première consultation » ne fonctionnera pas. Protection en temps réel -> La stratégie « Analyser tous les fichiers et pièces jointes téléchargés » doit être activée, sans quoi la fonctionnalité « Bloquer à la première consultation » ne fonctionnera pas. Protection en temps réel -> N’activez pas la stratégie « Désactiver la protection en temps réel », sans quoi la fonctionnalité « Bloquer à la première consultation » ne fonctionnera pas.
Générateur d'exports
BETAConfigurez l'état, la portée et les options, puis générez les sorties .reg, PowerShell, Intune et SCCM — ou ajoutez le paramètre à une collection multi-paramètres.
Ces exports écrivent le registre — ce n'est pas une GPO managée. ⓘ
Fichier .reg
Windows Registry Editor Version 5.00
; Exported from gporais.com
; Policy: Configurer la fonctionnalité « Bloquer à la première consultation »
; State: Enabled
; Supported on: Au moins Windows Server 2016, Windows 10
[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows Defender\Spynet]
"DisableBlockAtFirstSeen"=dword:00000000 Autres formats (PowerShell, Intune, SCCM)
PowerShell
# Exported from gporais.com
# Policy: Configurer la fonctionnalité « Bloquer à la première consultation »
# State: Enabled
# Supported on: Au moins Windows Server 2016, Windows 10
$path = 'HKLM:\Software\Policies\Microsoft\Windows Defender\Spynet'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'DisableBlockAtFirstSeen' -Value 0 -Type DWord Intune XML
OMA-URI: ./Device/Vendor/MSFT/Policy/Config/ADMX_MicrosoftDefenderAntivirus/DisableBlockAtFirstSeen
Data type: String
Value:
<enabled/> Intune Remediation
# === Detection script ===
# Exported from gporais.com
# Policy: Configurer la fonctionnalité « Bloquer à la première consultation »
# State: Enabled
# Supported on: Au moins Windows Server 2016, Windows 10
function Test-RegistryValue {
param(
[Parameter(Mandatory = $true)][string]$Path,
[Parameter(Mandatory = $true)][string]$Name,
[object]$Expected,
[ValidateSet('String', 'DWord', 'MultiString')][string]$Kind = 'String',
[switch]$Absent
)
try {
$item = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction Stop
} catch {
return $Absent.IsPresent
}
if ($Absent.IsPresent) { return $false }
$actual = $item.$Name
if ($Kind -eq 'DWord') { return ([int64]$actual) -eq ([int64]$Expected) }
if ($Kind -eq 'MultiString') {
$actualValues = @($actual)
$expectedValues = @($Expected)
if ($actualValues.Count -ne $expectedValues.Count) { return $false }
for ($i = 0; $i -lt $expectedValues.Count; $i++) {
if ([string]$actualValues[$i] -ne [string]$expectedValues[$i]) { return $false }
}
return $true
}
return [string]$actual -eq [string]$Expected
}
$checks = @(
(Test-RegistryValue -Path 'HKLM:\Software\Policies\Microsoft\Windows Defender\Spynet' -Name 'DisableBlockAtFirstSeen' -Expected 0 -Kind DWord)
)
if ($checks -notcontains $false) {
Write-Output 'Compliant'
exit 0
}
Write-Output 'Non-compliant'
exit 1
# === Remediation script ===
# Exported from gporais.com
# Policy: Configurer la fonctionnalité « Bloquer à la première consultation »
# State: Enabled
# Supported on: Au moins Windows Server 2016, Windows 10
$path = 'HKLM:\Software\Policies\Microsoft\Windows Defender\Spynet'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'DisableBlockAtFirstSeen' -Value 0 -Type DWord Scripts SCCM
# Exported from gporais.com
# Policy: Configurer la fonctionnalité « Bloquer à la première consultation »
# State: Enabled
# Supported on: Au moins Windows Server 2016, Windows 10
# SCCM Configuration Item guidance:
# Create a Configuration Item of type "Setting: Script".
# Discovery script: use the Detection script below.
# Remediation script: use the Remediation script below.
# Compliance rule: the Discovery script output equals 'Compliant'.
# === Detection script ===
# Exported from gporais.com
# Policy: Configurer la fonctionnalité « Bloquer à la première consultation »
# State: Enabled
# Supported on: Au moins Windows Server 2016, Windows 10
function Test-RegistryValue {
param(
[Parameter(Mandatory = $true)][string]$Path,
[Parameter(Mandatory = $true)][string]$Name,
[object]$Expected,
[ValidateSet('String', 'DWord', 'MultiString')][string]$Kind = 'String',
[switch]$Absent
)
try {
$item = Get-ItemProperty -LiteralPath $Path -Name $Name -ErrorAction Stop
} catch {
return $Absent.IsPresent
}
if ($Absent.IsPresent) { return $false }
$actual = $item.$Name
if ($Kind -eq 'DWord') { return ([int64]$actual) -eq ([int64]$Expected) }
if ($Kind -eq 'MultiString') {
$actualValues = @($actual)
$expectedValues = @($Expected)
if ($actualValues.Count -ne $expectedValues.Count) { return $false }
for ($i = 0; $i -lt $expectedValues.Count; $i++) {
if ([string]$actualValues[$i] -ne [string]$expectedValues[$i]) { return $false }
}
return $true
}
return [string]$actual -eq [string]$Expected
}
$checks = @(
(Test-RegistryValue -Path 'HKLM:\Software\Policies\Microsoft\Windows Defender\Spynet' -Name 'DisableBlockAtFirstSeen' -Expected 0 -Kind DWord)
)
if ($checks -notcontains $false) {
Write-Output 'Compliant'
exit 0
}
Write-Output 'Non-compliant'
exit 1
# === Remediation script ===
# Exported from gporais.com
# Policy: Configurer la fonctionnalité « Bloquer à la première consultation »
# State: Enabled
# Supported on: Au moins Windows Server 2016, Windows 10
$path = 'HKLM:\Software\Policies\Microsoft\Windows Defender\Spynet'
New-Item -Path $path -Force | Out-Null
Set-ItemProperty -Path $path -Name 'DisableBlockAtFirstSeen' -Value 0 -Type DWord Vous construisez une collection multi-paramètres ? Ajoutez ce paramètre et générez des exports combinés (.reg, PowerShell, GPO).